Proportions

Fog drops and their proportions in fog systems by the type of fog system manufacturer of fog equipment and fog nozzles refers, when it comes to the quality, like on the droplet size and number. This is sometimes crucial to the efficiency of a plant. But what can one imagine including? Fog systems spray water under high pressure and forming a fine mist, which is made up of tiny water droplets. Including your behavior, such as for example the sliding properties, the cooling potential, the ability to saturate the air, or to bind other substances to determine their size. A fog nozzle produces never always evenly sized drops. Moreover, the fact that the drop size differs greatly depending on the ambient temperature, relative humidity, wind speed, nozzle type, pressure and measuring point.

Therefore manufacturer of drop sizes would have to include these parameters. A direct comparison would only be meaningful if different nozzles types under same conditions with a single measuring device should be investigated. But to understand, in what quantities and proportions fog systems water droplets produce and what can this mean, should you have to see some examples of numbers. It go here not possible on any specific parameters. Theoretically, Ddeshalb are illustrated in the following examples. You can be but divine mist systems work with the dimensions. A drop of mist type fog system, produced by a water jet has an average diameter of about five microns. These are five millionths of a meter or five thousandths of a millimeter.

This volume and surface area can be calculated. 15 are related to one liter of water ' 000'000 ' 000'000 water droplets, with a total surface area of 1200 m2. The surface of a football field could produce accordingly with approximately 6 liters water. A fog nozzle now produces large drops of water, the exchange surface reduces linearly to the drop diameter.